I've been using my wheelchair more and more lately as I've been battling ever-increasing pain in my hips and back. And then, a few weeks ago, my right hip apparently decided that it was done playing, which means the pain is now so bad that my leg threatens to give out on me if I try to walk unassisted, and my next appointment with my orthopedic doc isn't until later this month. So, in the meantime, I'm making do as best I can, which means using my wheelchair a lot more than before.
 |
| Finished set |
Anyway, I've had this wheelchair for about a year and a half. It was gifted to me as a hand-me-down from my brother-in-law (who is a paraplegic). The wheelchair has been very helpful for me and has saved me from experiencing immense amounts of pain that I would have had without it, particularly when I'm cooking in the kitchen, because it saves me from having to stand/walk all the time.
But since I have recently been needing to use it even more, I decided the time had come to give her a bit of color and personality. 😁
First, I added some purple silicone hand rim covers, which I found on Amazon. Because purple is one of my favorite colors, obvs. 😊
 |
| With purple hand rail covers only |
Then I wanted to add some snazzy, colorful crocheted wheel covers. There are many tutorials online for how to make these, and there are many different methods that can be used to make them, so there isn't only just one "right way" to do it. This video by WheelchairCovers4U gives a good look at what the wheel covers are like and how they attach to the wheels. As you can see in the background, she has dozens of AMAZING and creative designs for the wheel covers she makes to sell. Her talent is very inspiring! I would say that if you want some wheel covers but don't want to make them yourself, you should definitely check out her shop.
 |
| Almost any circle will do - 14 rounds here |
After clicking around online, I learned that there are basically two methods used to attach the covers to the wheels: using semi-rigid, flexible tubing that lets the cover "snap" into place and uses tension to hold the cover in place on the wheel; or using binder rings to attach the cover to the hand rail. I opted to go the flexible tubing route.
 |
| Tubing and hose barbs |
The description of the supplies in this Etsy listing by JubilanceCrochet says they use 3/8-inch polyethylene tubing – outer diameter 3/8-inch, inner diameter 1/4-inch – to make their hoop frames. That size of tubing gives sufficient rigidity for the frame to hold its shape while still being flexible enough to allow the hoop to snap in/out of the wheel's hand rims. I bought my tubing at our local Ace Hardware, but just about any hardware-type store should carry it, or you can find it on Amazon. I also used 1/4-inch double-ended nylon hose barbs to join the ends of the hoops.
 |
| Hoops with hair dryer |
My husband helped me to measure where to cut the tubing and also to insert the hose barbs. We applied the heat from a hair dryer to the ends of the tubing for about 60 seconds to soften it up enough to get the barbs inserted; they were VERY snug. You can see in my photo with the hair dryer that one of the rings lies flat, but the other one was more potato-chip shaped. 😂 My husband tried to twist the ends of the chip-shaped hoop in an attempt to get it to flatten out more, but eventually he gave up. I told him I was pretty sure that it would still work out OK after I attached the crocheted part and pushed the cover into the wheel. And it did. After finishing it, the chip-shaped one does have a small gap where it doesn't snug up to the inside of the hand rail all the way around as well as the flat one does, but I'm not worried about it. It still looks cute to me. (You can see the gap in my GIF when looking at the wheel on the right side of the wheelchair.)
 |
| First attempt came up a bit short |
For the crocheted portion, I used Spin Me Around by Catherine Bligh (a paid pattern), but just about any circle-shaped afghan, doily, or mandala pattern will work. "Spin Me Around" just seems terribly apropos for a project like this, don't you agree? 😵😂 If I decide to make another set of these later, I might use the Rainbow Granny Spiral Sun-Catcher pattern by Jaime Ramsey for my next set (another paid pattern). 🌀 And, OMG, for Halloween, a set of these in Boo! by Marsha Glassner (free pattern!!) would be TO DIE FOR, don't you think?!?! 👻
 |
| Good fit this time |
The tricky part about making wheel covers for any wheelchair is that the manufacturers have many different wheel sizes they use, and even wheels of the same diameter made by different manufacturers might still require different size wheel covers, depending on many different factors, such as how the hand rails are attached, etc. So it's important to keep this in mind as you're making your own set of wheel covers: The process is going to be highly customized to your unique wheelchair, and you can't just blindly rely on a pattern to give you the exact measurements your specific chair will require. My wheelchair has 24-inch wheels, and the measurement inside the hand rails is about a 20-inch diameter. We measured the best fit for the tubing on my chair to be about 60-inch lengths. And, remember, if you use hose barbs to attach the ends like I did, the barbs will add a tiny bit of length to the final measurement.
 |
| First one done! |
Using "tough" acrylic yarn is a good choice for the durability needed for a project like this. I had most of a skein of Red Heart Super Saver Jumbo Stripes in the Parrot Stripe colorway on hand in my stash. I figured the bright colors and the long color changes it has would work well for this project.
 |
| First one installed - cuuute! |
It turned out that the one skein would have been just the right amount to make the two wheel covers, including the length needed to crochet the covers to the rims, if I hadn't already used part of the skein to machine knit two hats for my grandnieces. 😆 But even so, I was nearly finished with the final row of my second wheel cover when that yarn ran out. It ended with green, so I found some Red Heart Super Saver in Spring Green in my stash, which had enough length left to finish up that row and then crochet the second wheel cover to its rim, and it all turned out fine. Some makers, including JubilanceCrochet, prefer to use black yarn to attach their covers to the rims, no matter what color the center of the cover is, so I would say that it's fine to just use whatever colors you like and have on hand.
 |
| Two different 5mm hooks |
At my gauge, my wheel covers were the correct size after crocheting 16 rounds. I stopped after 14 rounds on my first one and was about halfway around crocheting it to the rim when I realized that I was going to need to make the circle part bigger. So if you're making wheel covers for yourself, just be prepared for some trial and error as part of the process. You need them to be large enough to fit the hoops, but you also want the crocheted circles to stretch a bit so they fit snugly inside the hoops. It's a balance between "big enough" but not "too big."
To attach the crocheted circles to the rims, I chained up two and then single-crocheted around the rim into each stitch of the circle all the way around. This step is extremely fiddly, especially at the beginning, and awkward and difficult. But if you take it slowly and give yourself plenty of rest breaks, eventually you will make it all the way around and be ready to finish off with a knot to secure everything and weave in the tail.
As a postscript, I included the photo of my two 5mm crochet hooks to illustrate the differences between the lip length. I prefer to use tapered hooks, like these, but even within that broad category, there can be significant differences in the shapes that affect their usability for individual crocheters. For me, the hook on the right, with the longer lip, was definitely more difficult to use, because the lip kept snagging as I worked. The hook on the left worked much more smoothly for me. The difference is minor, and I know different crocheters will have different preferences in which tools work best for them. But it's something to keep in mind: If you're struggling with a particular hook, consider trying one from another manufacturer.