Kawaii ghost keycover

I needed a cover for my car's key fob/remote to help protect it while it was inside my purse. This adorable little ghost key cover is ready to go to work! 👻

I made this based on the Crochet Cute Ghost Key Cover design by Kukkacrochet by Putri on YouTube. I modified her design to fit over my car's key fob, and I didn't include the hat or bat topper portion.

For the face, I used these safety eyes (which I found on Amazon). After securing the backs to the eye posts, I used a lighter to carefully heat the eye posts and pressed them flat using the flat side of a hammer head. (You just need any heat-resistant flat surface to press down on the hot plastic, and a hammer head is what I had handy. I didn't actually "hammer" the eye posts to flatten them. 😂) This step usually requires a few separate times of heating the plastic and pressing it down until it's shaped the way you want it. The taller the eye posts, the more times you'll need to heat and press them. Don't try to do it all at once. Just take your time and work at it gradually, and eventually they will flatten out. You definitely want to be extra careful to NOT burn your yarn as you work!!

To secure the crochet chain to the split keychain loop, I added a pony bead. Any pony bead will do, but I happened to have a glittery purple heart-shaped bead in my stash, so of course I used that one. 😍  To slip the pony bead onto the chain, use a 2.5 mm hook. Place the bead on the hook, catch the crochet chain in the hook, and pull the chain loop through the bead.

I don't remember anymore where I got the colorful split keychain rings from (that was at least 10 years ago), but it might have been the craft section at Walmart. They came in a bag of about 100 (basically a lifetime supply for my craft room) in two different sizes in four different colors: purple, blue, green, and red. Naturally, I used a purple one for this project! 💜 Happy Halloweeeeeeen!!

My little keychain ghost also matches with my ghost wheelchair wheel covers! 😁👻💜
 

Boo! Wheelchair Spoke Covers

If you know me, you know I just had to do it.

As I said in the narrative of my earlier project for the first set of wheelchair spoke covers I made, having a set of these in Boo! by Marsha Glassner is an absolute MUST for Halloween, because if you know me, you know that I ADORE Halloween. (The cutesy-creepy Halloween stuff, that is, not so much the gory-horrific stuff.)

Finished set

Boo! is designed to be an adorable doily crocheted with No. 10 crochet thread. To make the same design large enough to work as a set of wheelchair spoke covers, it's necessary to use heavier yarn (both for size and durability) and a larger hook. I used Red Heart Super Saver in the colorway Soft White and a 4 mm hook.

I had seen pictures and videos where other crocheters had made these sized as wheelchair spoke covers, but I wasn't able to find where anyone blogged about how they did it, so I basically had to start my project from scratch and use the trial-and-error method to figure out how to make it work.

The first set of wheelchair spoke covers I made previously was done with Red Heart yarn and a 5 mm hook, and those covers were the right size to fit my wheelchair's wheels after crocheting 16 rounds. The pattern for Boo! is 23 rounds to the top of the ghosts' heads, so I knew I was going to have to make some adjustments to be able to get the design to fit the wheels of my wheelchair.

First attempt overlaid a previously made working spoke cover

I am not including all the details here of how I made the flexible hoops for the spoke covers, which is how they are mounted inside the wheels' hand rails, because you can find that info by viewing my previous spoke cover project. I used the same process for this set.

1st attempt (L), 2nd attempt started (R)

For my first attempt here, I decided to use a 4 mm hook to crochet the pattern as written (I found it easier to follow the chart rather than the written instructions) just to see the size it would make that way, and then use that to figure out how much I was going to need to change it to fit. I stopped on round 22 (which eliminated the last round at the top of the ghosts' heads). You can see in my photo of the first attempt overlaid on one of my previously made spoke covers that it was going to need to be smaller by at least three rounds. 

2nd attempt attached to hoop

For my second attempt, knowing that I needed to make the design at least three rounds shorter, I decided to try skipping rounds 2, 4, and 6. Doing that meant that I had to change the increases on rounds 3, 5, and 7 to keep the stitch counts the same. And, again, I stopped the pattern after crocheting round 22. Making the pattern that way eliminated three rounds, but you can see in my photo of the second attempt after I attached it to the hoop frame that the fit was still too loose, so I knew that for my third attempt I was either going to have to eliminate more rounds from the pattern or else come up with a different solution.

2nd attempt (L), 3rd attempt (R)

I was feeling somewhat stumped at this point, because I was worried that eliminating more rounds from the pattern would be detrimental to the ghosts' appearance. I was clicking around, still trying to come up with a better solution, when I came across this video of a livestream by TheCraftyCub on YouTube of them crocheting Boo! on camera. Near the beginning of the video, where they are describing the pattern for their followers, they talk about the stitches used in the design, and they mentioned half-double crochets. I had already crocheted the pattern twice by the time I watched this video, and (I intend no offense to TheCraftyCub, but) I was pretty sure that there were no half-double crochet stitches anywhere in the Boo! chart.

Third attempt

But then the lightbulb went on over my head. 💡

I paused the video to think: What if I tried crocheting Boo! using half-double crochet stitches everywhere the pattern used double crochets?

Well, I didn't know for sure how it would turn out, but I decided to try crocheting the pattern that way for my third attempt. And, as you can see in my photos of the finished spoke covers, using half-double crochets throughout worked and resulted in the perfect size I needed for my wheels, AND I was able to follow the pattern chart all the way through round 23, so my ghosties are fully complete (according to the pattern).

To store the wheelchair spoke covers, I'm using a cable keychain loop that can open/close, similar to these found on Amazon. It's easy to thread one of these kechain loops inside the flexible hoops of a set of wheelchair spoke covers, and then hang the keychain loop from a hanger in the closet. The spoke covers take up very little room stored that way, and they are easy to access whenever I want to switch out the spoke covers on my wheelchair.

Teacup Chihuahua Costumes Ladybug and Bumblebee

My next-door neighbor, Lori, has two teacup Chihuahuas. Like most little dogs, these tiny boys have oversized attitudes and think they are the guard dogs of the neighborhood. 😂

Anyway, Lori likes to dress her boys up in costume whenever possible, so I thought I would gift them a set of these Ladybug and Bumblebee outfits.

Designer Abbey Jackson wrote the Ladybug pattern to fit her fluffy 10-pound cat, and the Bumblebee pattern was written to fit her other cat, who was a 4-pound kitten at the time. 

Lori's dogs, being the micro teacup variety of Chihuahua, are almost certainly less than 5 pounds each. I didn't actually weigh or measure them before starting this project, so it probably would have been a lot smarter of me to have measured them first! Ha!

I used leftover yarn scraps to crochet these, mostly bits of Red Heart and/or Caron Simply Soft, I'm guessing. Initially, I crocheted one of each of the costumes based on the 10-pound pet size pattern, just to get a sense of the sizes. Then, I followed those up with one of each in a significantly smaller size, which I hope will fit Lori's dogs. Fingers crossed!

I deviated from the written pattern by starting the neckline with a 5.5 mm hook and doing a row of foundation DC. IMO, the foundation stitch lets the neckline stretch more easily than with a row of chains followed by a row of DCs.

After joining to work in the round, I worked a round of alternating FPDC/BPDC, still using the 5.5 mm hook, to give the neckline a ribbed effect. Then I switched to the 5 mm hook to work the next round in FPDC/BPDC, and the following two rows in FPDC/BPDC. I used the 5 mm hook for the rest of the costume.

I worked the body rows/rounds in DC as specified in the pattern, but I deviated from the pattern by making fewer stitches and fewer rows to size the costumes down to fit Lori's boys.

Fingers crossed that they like these! 😊

Update: Lori said that these fit her boys perfectly, but they didn't like her trying to put their front legs through the space between the neckline and the chest strap. So I'm going to fix that problem by making the chest strap open on one end and attaching it with a button. That way, the boys don't have to fret about squeezing their front legs through the small opening. I think that will fix the issue. 🤞

Sally Stitches Pumpkin

Many years ago, as I was first learning about how to work with circular knitting machines, I used a small scrap of Red Heart Ombre yarn in the True Blue colorway to make a quick, single-layer pumpkin.

After finishing it, I decided later that circular-knitted pumpkins definitely look better when they're made double-layered. But I had this single-layer blue pumpkin sitting there wondering how it might fit into my seasonal decorating for one of my favorite holidays: Halloween.

Inspo photo from Disney's Emoji Blitz game

My poor blue pumpkin actually sat for a long, long time (more than five years!) waiting for its chance to become something more. I didn't want to just rip it apart and start over, using the materials for something else.

I would pull it out of a yarn bin every so often and ponder it. I'm not sure exactly when it finally occurred to me that the light blue yarn kind of resembled the skin tone of Sally from The Nightmare Before Christmas. But once I got that idea in my head, I was determined to transform my blue pumpkin into a Sally character pumpkin.

Another inspo photo found online

Sally's most distinctive features are her blue skin, her cherry-red hair, her big white eyes with little black pupils, and, of course, the black stitches all over her skin. (Her colorful patchwork dress is also distinctive, but for this project, I was going to focus just on Sally's face.)

Another inspo photo found online

For the eyes, I followed this tutorial by Harriet's Crochet on YouTube. I made the eyes with fingering weight cotton yarn in black and white and a 2.25 mm crochet hook. I used white instead of the iris color shown in the tutorial, and also added an extra round of white to get them to the finished size I wanted.

Top view after adding hair and eyes

For the hair, using the cherry-red yarn and a 5 mm hook, I crocheted a foundation SC chain until it was long enough to reach vertically from pole to pole on the pumpkin, which ended up being 28 stitches long. The remaining rows are worked in YOslst in the back loop to give a texture that resembles her strands of hair. The finished rectangle is about 14 inches long and covers about 2/3 of the pumpkin (leaving the other 1/3 of the pumpkin open for her face). I gathered the top and bottom edges and wrapped them around the pumpkin and tied everything together to secure.

Then I crocheted a vine-like stem similar to the one I added to my crocheted Little Rustic Pumpkin back in 2019. To make the vine, I crocheted 6 SC in a magic circle, then kept crocheting the 6 stitches in a continuous spiral until the length was long enough to cover a 12-inch pipe cleaner. (I actually twisted together two pipe cleaners.) After inserting the pipe cleaners, I started increasing each round of SC until the circle had 42 stitches (to provide a secure base for the vine, and to cover the "bald spot" at the top of Sally's head where I wasn't able to cinch the top of her red hair any tighter).

Bottom view

Sewing on her eyes was probably the scariest step for me, because I didn't want to have them end up looking wonky. But I just worked slowly and carefully, and they ended up looking pretty good. 😊 I intentionally did NOT stitch her eyes down tightly where they cross the creases between the pumpkin segments. 

Using the fingering-weight black yarn, I embroidered a kind of stem stitch to line the top edge of her eyes and then continued sewing her eyelashes in little V's back across the line across the top of her eyes.

Then, in black, I embroidered Sally's distinctive slash that crosses her face near her right eye. And then I embroidered the stitches that extend across her cheeks on either side of her lips.

The final touch was to embroider her lips using a sort of puffy satin stitch using a bit of the same yarn as her hair. You can find more info about the yarns I used on my Ravelry project page.

I think my Sally Stitches Pumpkin turned out great, and she looks so happy sitting there on my hearth beside her "Jack Skellington."

Feet up to relax after a job well done

I love Sally's character, and I have even dressed up as her for my friend Kim's Halloween party!

Sally's Song

I sense there's something in the wind
That feels like tragedy's at hand
And though I'd like to stand by him
Can't shake this feeling that I have
The worst is just around the bend
And does he notice my feelings for him?
And will he see how much he means to me?
I think it's not to be

 

What will become of my dear friend?
Where will his actions lead us then?
Although I'd like to join the crowd
In their enthusiastic cloud
Try as I may, it doesn't last
And will we ever end up together?
No, I think not, it's never to become
For I am not the one

 

Skeleton Doll

This is a fun, easy, and quick-to-make pattern by Ashley of A Crafty Concept for an adorably spooky little crochet skeleton doll, a perfect addition for everyone's handmade Halloween decor!

The written pattern is free on her blog, and she also provides a video tutorial.

Work in progress - paint drying

He reminds me of a simplified version of Jack Skellington, so I have set him on my hearth beside his adoring Sally in pumpkin form. Maybe I can give him a tuxedo coat and bat bow tie later for a little more authenticity (Disney-thentic, ha).

Jack's Lament

There are few who'd deny, at what I do I am the best
For my talents are renowned far and wide
When it comes to surprises in the moonlit night
I excel without ever even trying
With the slightest little effort of my ghostlike charms
I have seen grown men give out a shriek
With the wave of my hand and a well placed moan
I have swept the very bravest off their feet

Yet year after year, it's the same routine
And I grow so weary of the sound of screams
And I, Jack, the Pumpkin King
Have grown so tired of the same old thing

Oh, somewhere deep inside of these bones
An emptiness began to grow
There's something out there, far from my home
A longing that I've never known

I'm the master of fright, and a demon of light
And I'll scare you right out of your pants
To a guy in Kentucky, I'm Mister Unlucky
And I'm known throughout England and France

And since I am dead, I can take off my head
To recite Shakespearean quotations
No animal nor man can scream like I can
With the fury of my recitations

But who here would ever understand
That the Pumpkin King with the skeleton grin
Would tire of his crown, if they only understood
He'd give it all up if he only could

Oh, there's an empty place in my bones
That calls out for something unknown
The fame and praise come year after year
Does nothing for these empty tears 

 

Halloween Snow Heart Beanie

Oooh, it's almost my favorite time of the year again!

Designer Leesa Nixon recently shared a photo on her socials of the Beetlejuice/Halloween colors version of her Snow Heart Beanie (paid pattern), and I just knew that I needed to make one for myself in a messy-bun/ponytail style, because Halloween is probably my favorite holiday, too!!

These Sour Apple poms by Dannisdesignscrafts on Etsy add the perfect finishing touch! This is a really fun and quick pattern to crochet, and it doesn't require very much of each color of yarn. Love it!

Quick and easy Halloween decor craft

With Halloween less than a week away, here's a super easy decoration idea that you can use to decorate your front porch or anywhere you need a bit of spooky ambience.

All you need to make these adorable little ghosts is a printer, some paper for the printer, and some scissors. You can even let your littles color a sheet of ghosts for some extra fun.

Click here to download the printable PDF. 

 

Witchypoo Scarf

This pattern came to me when I was drifting in that place where I was not quite asleep but not quite awake. It's an easy crescent moon-shaped scarf that can be made with just about any yarn at any gauge. Just in time for Halloween stitching, I present to you the Witchypoo Scarf!

The Witchypoo Scarf can be made in a solid colorway, or a variegated, or an ombre, or in any yarn that your heart desires, but I think making it in two colors really makes the curves of the crescent shape pop visually.

304 stitches on needle

Comprised of mostly mindless, movie-watching-friendly, reversible garter stitch, you only need to pay attention to what you're doing during the first few stitches of each row, where the bottom edging detail is worked as you go.

200 stitches on needle

This pattern is best worked with an interchangeable needle with a long cable (at least 42 inches) to accommodate the large number of stitches.

Seeing the black and purple stripes in my scarf reminds me of the fun witchy-poo striped tights that my daughters used to wear at Halloween, which are memories that bring a smile to my soul. I hope your soul will find reasons to smile, too, as you knit and wear this scarf.

Measuring my gauge

As you can see in the "measuring my gauge" photo above, my gauge is about 4 stitches per inch and 4 rows per inch. Details about the yarn and needles used are on my Ravelry project page.

The scarf grows quickly; the only reason why it took me a couple of months to finish mine is because I was multitasking and working on several other projects at the same time. 😂 

My only question now is: Should I release this scarf design as a paid pattern? Would you be interested in making it if the pattern was available?

Join the free Halloween CAL

Melanie Grobler of M and M Crochet Designs is hosting a free Halloween Crochet Along (CAL) on her blog and Facebook group. This was a lovely and fun CAL to be a part of, where we were creating two of Melanie's Melly Teddy Ragdolls: Gabby Ghost and Bobby Bat. If you would like to be part of it, too, head on over to her sites and check out the patterns. If you start now, there is still time for you to finish one or both of the ragdolls by Halloween!

My dolls differ from Melanie's written pattern in a few ways: My Gabby Ghost has no nose or mouth. (I like her face with just the eyes, eyelashes, and cheeks.) My Bobby Bat is mostly purple but with black wings and some other different color choices. On both dolls I opted not to stuff the hands or feet. (Again, just a personal preference for the ragdoll aesthetic.) And my dolls both have 12mm button eyes instead of safety eyes. If you want more details about my yarn choices, check out my Ravelry project page.

I made these using a 4mm crochet hook, but my hands would have been more comfortable if I had used a 4.5mm hook. I do own a hook that size, but the set it's part of has been missing since we moved two years ago, and I'm just stubborn enough not to buy another one because I know the set will turn up again once I'm able to fully unpack my craft room boxes. So, in the meantime, I'm making do with a different set of hooks that used to be my traveling set. Le sigh!!😉

Gabby's pumpkin is crocheted from the CAL pattern, but I made the pumpkin accompanying Bobby on my 22-needle Addi Pro circular knitting machine. I crocheted the stem and vines according to the CAL pattern, which worked out fine.

Join the free Halloween 2022 Crochet-A-Long at the following links:

Introduction

Shortcut to Part 1

Shortcut to Part 2

Shortcut to Part 3

Shortcut to Part 4

Shortcut to Part 5

Shortcut to Part 6