A pocket scarf for Morgan

Last Christmas I made a reversible beanie for Morgan with the Red Heart Super Saver Zebra colorway on the outside and lined with white.

When I asked Morgan's mom for some gift ideas for this Christmas, she told me that Morgan has worn her zebra hat quite a lot throughout the past year and suggested that I make her a matching scarf for this Christmas. Challenge accepted! 

I got a few more skeins of the Zebra yarn and decided that I wanted to make a pocket scarf for Morgan. But unlike last year, when the hat knitted up like a dream, the yarn this year was being very uncooperative. I had to restart the project four times because of dropped stitches, which was frustrating, but I kept on trying because I knew this was going to be for my grandniece (if I could ever finish it!!).

During the initial failed starts, I alternated between using my Addi King and the Sentro 48, but neither one was working very well with the yarn. I finally settled on making the scarf on the Sentro and went very, verrrry slowly at first, pushing each stitch down by hand as it passed the feeder (like the technique shown in this video), to make absolutely certain that the stitches were seated properly. Then, when I had enough length completed (around 40 rows), I added some aggressive weight using the pot lid trick. The weight made the rest of the project work smoothly. (You just have to stop about every 15-20 rows to stretch the work below the pot lid and then reposition the lid closer to the top of the work to keep it high enough to keep tension on the needles.)

I knitted 320 rows, closed the tube ends, and then turned up 8 inches at each end of the scarf for the pockets and stitched the sides together using the invisible mattress stitch.

The only thing about this project that disappointed me was the way the stripes came out looking so different on the scarf than they were on the hat. The colors on the two projects do match, since it is the same colorway of the same brand of yarn, but I have to wonder if the yarn isn't being made slightly differently now than it was a year ago. (???) It's hard to say. But I hope Morgan will be happy with it! Fingers crossed!

Butter Mellow pocket scarf

Sunshine, daisies, butter mellow,  
Turn this stupid, fat rat yellow.

That silly "spell" didn't work for Ron Weasley in "Harry Potter and the Sorcerer's Stone" as he tried to turn his rat familiar, Scabbers, yellow, but this butter-yellow yarn from my stash knitted up beautifully to make a cozy pocket scarf for Mika and Emmy. 

The sport-weight fiber worked to a gauge of about 4-5 rows per inch. And since I wanted a scarf 80 inches long (to turn up 10 inches at each end for deep pockets, leaving an overall length of about 60 inches), I made the scarf 400 rows long. (Which actually turned out to be a bit too long, but that was OK; I just made the pockets deeper to compensate.) The yarn is an interesting blend of 55% acrylic, 35% rayon, 5% wool, and 5% vinyon (whatever that is!), but the fiber is safe to machine wash and dry, so it's easy to care for.

Cast on with at least 6 rows of waste yarn in a contrasting color to your project yarn, then add your project yarn and crank until you have the desired number of rows. Cast off with another 6 or more rows of waste yarn, then remove project from the machine. Using a 5mm crochet hook, close each end of the tube as shown in this video by Jojo Juju. Fold each end of the scarf until the pockets are as deep as you want and pin them in place with locking stitch markers. Mattress stitch both sides of each pocket and knot securely. Hide all tails inside the tube, and enjoy your new pocket scarf! 

Jojo also has a full video tutorial for how to machine-knit a pocket scarf, which you can view at this link.

The sport-weight yarn is rated a 2, when usually size 4 yarn is used in the circular knitting machines. For me the trick to getting lightweight yarns like that to work in the machine is to maintain a firm tension.

I had just enough yarn left after knitting the scarf to make a matching beanie of 113 rows.

 

Rustic Tree Ornaments

We live on a lovely little cul-de-sac with six neighbors, and every year at Christmas we exchange small gifts. This year we are gifting pint jars of locally produced jam, but I wanted a little something extra to tie onto the jars, and this pattern for Rustic Tree Ornaments by Regina P Designs was the perfect finishing touch.

Each tree requires only a small amount of yarn, and I can complete the crochet portion of the work in a mere 20 minutes or so, making it possible to whip up several of these in a single evening.

Each one also uses a small amount of 24-gauge floral wire and about 7 or 8 beads.

I'm using 10mm beads made of olive wood harvested in the holy land to add a layer of deeper meaning to the ornaments. I found the beads on Amazon. The "certificate of authenticity" was included with the beads. I scanned that into a digital file and then printed it onto Avery stickers that are 2 inches by 3 inches, so I could add the stickers to the reverse side of the gift tags (which are printed on Avery business cards).

A demogorgon for Wendy

I am really pleased with how well this Stranger Things Demogorgon free pattern by Andrea Leek turned out. My grandniece Wendy is a huge fan of "Stranger Things," so this will be her birthday present. 

I decided to make the demogorgon in a slightly less demonic chibi ragdoll style. I worked the pattern as written for the legs and arms but subtracted two rows from the torso to shorten it slightly. I worked the head separately so it could be stuffed and closed and then stitched to the top of the unstuffed torso. Legs and arms are also unstuffed.

The toes, fingers, and "flower" face are worked as written in the pattern. Don't worry if the flower seems too full and wants to curl as you make it; it will straighten out as you stitch it to the head. I added more teeth to this one than was shown in the pattern to resemble the original character more closely.

I worked on this back in July and August, so my only problem was having to wait so long for December to get here so I could gift this little guy to Wendy! 

Even though my yarncraft productivity has fallen dramatically in recent years due to my chronic pain issues, it felt great to be able to finish this project. And now I bet Wendy's sister Charlotte will want me to make one for her too! 💜