Heart-shaped Valentine Wreath

I started working on this project on Valentine's Day itself, so I didn't finish it in time to display the wreath for the holiday this year. But I'll store it carefully so it will be ready for next year! 😆

I didn't count the rows on this project (my Sentro 40 doesn't have a counter on it), but I started with a few rows of waste yarn and then simply knitted through one entire skein of Walmart Mainstays 100% acrylic yarn in Pink Multi on medium tension. Finish off with another few rows of waste yarn before casting off from the machine. The full skein produced a knitted tube that's about 50 inches long, and I counted it having a gauge of about 4 stitches per inch, so we can do the math and estimate this tube being about 200-ish rows long. The tube from the 40-pin machine is about 6 inches wide.

To shape the wreath I used this 13.5-inch heart-shaped wreath form that I bought on Amazon. If you want to make a project like mine, any similar size wreath form should work well.

 

Full disclosure: My Sentro hated this yarn for every single stitch, but the colorway is just so fun that I kept going. (It wasn't bad enough to make me stop knitting. The machine just behaved stiffly, and I had to watch every single stitch like a hawk to make sure they were seating properly, so it was EXTREMELY slow going, but it wasn't any harder to crank than normal, so I felt safe enough to continue.) Actually, I first tried this yarn on my Addi King Size ... and the Addi hated this yarn, too. So be warned. But, dang, the finished product is just super cute!

Another reason to be irritated with this yarn is that my skein had three splice/knots all within what I estimate was the first 70 rows, which seems excessive. However, after that the rest of the skein was splice/knot free, so maybe I just picked a dud skein.

To add the knitted tube to the wreath form, I dropped one stitch on opposite sides of the tube, wrapped the tube around the wreath form, and then (using a 5mm crochet hook) joined the dropped stitches from alternating sides using a slip stitch crochet technique (catching two strands from each side at a time) similar to the technique used in this video by Shelby Acosta. (Shelby catches four strands from each side while joining, whereas I only caught two strands from each side, but otherwise the technique is the same.) The join itself adds a nice bit of contrast to the variegated yarn, so after finishing off the join I twisted it around on the wreath form until the joined stitches were visible on the front side of the wreath.

I whip-stitched the tube ends together at the bottom of the wreath, tied a few knots to secure the ends, and that was it.

Now all that's left to do is to add a hanging loop, and also to decide whether I want to add any trim pieces to make my wreath even cuter. Some white pompoms or even some silk flowers or greenery might look nice. What do you think?

Panthers Pride

I made this set to gift to the Perry Panther in our family, Daniel. These were both machine-knit. I made the scarf on my Addi King Size (46 pins), and the hat is made on my Sentro 48. The stripe pattern is based on the Years 3/4 scarves in Harry Potter. Perry High School's colors are maroon and gold, so I used Red Heart Super Saver in the Burgundy (main color) and Saffron (contrast color) colorways. I might decide to add some fringe to the scarf later.

Hat recipe on Sentro 48: Main color 30 rows. Stripes section: 2 rows contrast color; 4 rows main color; 2 rows contrast color. Finish hat by continuing in main color for another 72 rows. 110 rows total.

Scarf recipe on Addi 46: Starting/ending block 15 rows main color. Stripes section: 2 rows contrast color; 6 rows main color; 2 rows contrast color. Large block 30 rows main color. Repeat alternating sections of "stripes section" and "large block" five more times (for a total of six large blocks), ending with a "stripes section." Repeat "starting/ending block" to finish. 280 rows total. (Can add more large block sections alternating with stripes sections for a longer scarf, if desired.)

Perry High School's team colors are very similar to Gryffindor House. 😊

 

I Made a TikTok

Well, I finally took the plunge and made a TikTok account. I kept seeing lots of fun videos being promoted by some really creative and inspirational yarncrafters on TikTok and decided I might as well make my own account there, even if it was only to hang out there and watch everyone else's videos. 😆

My TikTok tagline says: "I'm just here to watch all y'all's creative videos!" And that's true! I don't think I'll be uploading very many original videos there ... but who knows. Time will tell.

For now, I only have one video on there. I figured I should have at least one video uploaded to give my TikTok account some legitimacy. 😂

As I explained in the brief description of my TikTok post, the very first time I used my brand new Sentro 48 knitting machine, the counter didn't work. I had just unboxed the machine right before shooting this video. I cast on with some Red Heart yarn and had worked five or six rows when I noticed that the counter wasn't incrementing when the white needle passed the yarn feeder, so I grabbed my phone and shot some wobbly footage of the next time the white needle went by, in case I needed to have video evidence I could share with the seller to show them the counter wasn't working. But, wouldn't you know it, on the very next row after that the counter started working, and it has worked fine for me ever since! So I never had to send a complaint to the seller, and I continue to be totally happy with my Sentro 48 to this day. 😍 In my experience, the Sentro 48 actually runs smoother and quieter than either size of the Addis and also the Sentro 40. (I did briefly try to use a Sentro 22, but the gear was stripped on the one I bought, so I returned it right away and bought the Addi 22 instead.)

@yarncraftbysusan

My brand new Sentro 48 knitting machine. The very first time I used it the counter didn't work but it has worked fine for me ever since. ##knitting

♬ original sound - Yarncraft by Susan

 

 

Tooty-ta!

I don't remember exactly when was the first time I saw this TV commercial for Cox internet service, but right from the beginning it struck me how much the woman in the video-within-the-commercial resembled yarn and knitting machine guru Margaret Olander. 

I came across Margaret's videos on YouTube. (And here's a link to her blog.) I think if anyone spends any amount of time exploring videos about knitting machines, they will eventually discover Margaret's reviews and tutorials. Have you seen her videos before? Don't you agree that she looks like the woman in the Cox commercial?!

After noting the resemblance, I just had to see if I could find the original version of the Tooty-Ta video that the Cox commercial used. And here it is: 

Personally I think "Dr. Jean" (the woman leading the Tooty Ta singalong) could be a doppelganger for Margaret. 

 

Margaret has a boatload of useful and informative videos. Here's one she made about the Sentro 48 that I found interesting:

CPAP hose sleeve re-knit

A few years ago, I hand-knit a sleeve/cozy for the hose on my CPAP machine. It used one whole skein of Big Twist Sincerely Ombres in Gray Denim. I knit it flat on size 7 needles, then (without breaking the yarn) left a long tail and used a 5mm crochet hook to single-crochet the long seam together on the inside, which would make it easier for me to undo the work and reuse the yarn later if I decided to redo the hose sleeve, since that was my first attempt at knitting one.

It was around that same time when I first started hearing about the wonderful circular knitting machines like the Addi, Sentro, etc., and after spending some time studying what the machines could do, I was certain I could reknit this hose sleeve using a 22-needle machine. It would be a couple of years before I'd decide to invest in the Addi Express Professional, but that time finally came, and this is the first item I knitted on it.

I cast on with waste yarn for about 12-13 rows then started knitting with some Grey Heather Red Heart Super Saver. When I hand-knit the hose sleeve, it was only 17 stitches wide, and since the Addi has 22 needles, I wanted to be sure the reknit sleeve would be long enough, so I knit with the gray Red Heart yarn for 48 rows (about 11 inches). Then I changed to the Big Twist yarn and continued knitting. The counter read 358 rows when I stopped knitting with the Big Twist yarn and switched back to waste yarn for another 12-13 rows before casting off.

I had left a long tail (about 6 yards) before starting the Red Heart yarn in the machine. I used that long tail to pick up and SC in each stitch from the waste yarn on the cast-on end. Then I continued to SC in each stitch around in a continuous spiral (without joining at the end of rounds) until the yarn ran out. There was enough yarn for about 4 rounds of SC on that end. I finished off with the gray yarn and then removed the waste yarn from that end of the hose cover.

At the other end of the hose cover I had also left a long tail of the Big Twist yarn. I used that tail to pick up and SC in each stitch from the waste yarn. Then I chained 16 to form a long loop for the frame of my mask to slip through (to help hold the hose sleeve in place during use), then SC in the next stitch to join the loop to the edge of the hose sleeve, and SC in the next 10 stitches and chained 16 again for the second mask loop. I joined that loop with a SC in the next stitch and SC in all the stitches until I was back to where the first loop chain began. I put a SC in each chain of the loop, then continued with SC around the edge of the hose sleeve until reaching the second loop chain. I repeated putting a SC in each chain and then continued in SC along the edge of the hose sleeve until the yarn was about to run out and finished off there.

I think the extra stitches in the width of the Addi-knit hose sleeve will make it a little bit easier to put on and take off this version of the hose sleeve compared to my hand-knit version. These yarns are nice and soft (after machine washing and drying), so they make a nice hose cover.