Lots-a hanger covers

Crocheted or knitted hanger covers are so quick and easy to make and are perfect for making your plastic tubular hangers slip-resistant. These are quick projects that can be great for busting down your yarn stash because they only require small amounts of yarn, and they produce a useful finished object. I mean, who doesn't need a collection of yarn-covered hangers in their closet to keep their nice blouses (etc.) from falling onto the floor? 😊

The crocheted Hanger Cover free pattern by Frugal Knitting Haus is a great, basic option for dressing up your everyday hangers. These look equally great whether worked in solid colors or variegated yarns.

The strip you crochet is six stitches wide (about 2 inches) by about 36 inches long. When you finish off, cut a long tail (about 2.25 times the length of the finished work) and use the tail to sew the cover to the hanger with a wide whip stitch (about 3-4 stitches per inch). No need to be fussy about it because the sewing stitches will blend into and be disguised by the cover. Knot the tails together and hide them inside the work for an easy finish.

Another easy way to make hanger covers is by using a 22-needle knitting machine, such as the Addi Pro.

You can make a matching set of multiple hangers all from one skein of yarn, or you can do like I did above and just grab whatever pieces of yarn you have available for a unique, scrappy hanger.

Using a 22-needle machine, cast on with a few rows of waste yarn. Change to your working yarn and knit 160 to 170 rows to fit most tubular plastic hangers. Leave about a 2-yard tail before cutting the working yarn and drop it into the center. Change to waste yarn and work a few more rows then cast off from the machine. Gently stretch the knitted piece.

Using a 5mm crochet hook, close the end of the tube with the short tail and remove the waste yarn, pulling the short tail through the last loop to secure it. (Don't hide this tail inside yet.) Then close the end of the tube with the long tail, pulling the long tail through the last loop to secure it.

Thread the long yarn tail onto a large needle. Hold the knitted strip so the end wraps around the hanger and whip-stitch the long edges of the knitted piece together. Stretch the knitting until the ends of each side meet just below the hook of the hanger and whip-stitch or mattress-stitch the ends together for a neat appearance. Knot the tails together to secure and then hide the tails inside the knitting for an easy finish. Now your covered hanger is finished and ready to use.

The striped machine-knit hanger cover in the photo above was made with 160 rows, which was just long enough to fit snugly on the hanger. It might have been better if I'd made it 170 rows, which is what I did in the machine-knit hanger cover in the photo below. 

Heart-shaped Valentine Wreath

I started working on this project on Valentine's Day itself, so I didn't finish it in time to display the wreath for the holiday this year. But I'll store it carefully so it will be ready for next year! 😆

I didn't count the rows on this project (my Sentro 40 doesn't have a counter on it), but I started with a few rows of waste yarn and then simply knitted through one entire skein of Walmart Mainstays 100% acrylic yarn in Pink Multi on medium tension. Finish off with another few rows of waste yarn before casting off from the machine. The full skein produced a knitted tube that's about 50 inches long, and I counted it having a gauge of about 4 stitches per inch, so we can do the math and estimate this tube being about 200-ish rows long. The tube from the 40-pin machine is about 6 inches wide.

To shape the wreath I used this 13.5-inch heart-shaped wreath form that I bought on Amazon. If you want to make a project like mine, any similar size wreath form should work well.

 

Full disclosure: My Sentro hated this yarn for every single stitch, but the colorway is just so fun that I kept going. (It wasn't bad enough to make me stop knitting. The machine just behaved stiffly, and I had to watch every single stitch like a hawk to make sure they were seating properly, so it was EXTREMELY slow going, but it wasn't any harder to crank than normal, so I felt safe enough to continue.) Actually, I first tried this yarn on my Addi King Size ... and the Addi hated this yarn, too. So be warned. But, dang, the finished product is just super cute!

Another reason to be irritated with this yarn is that my skein had three splice/knots all within what I estimate was the first 70 rows, which seems excessive. However, after that the rest of the skein was splice/knot free, so maybe I just picked a dud skein.

To add the knitted tube to the wreath form, I dropped one stitch on opposite sides of the tube, wrapped the tube around the wreath form, and then (using a 5mm crochet hook) joined the dropped stitches from alternating sides using a slip stitch crochet technique (catching two strands from each side at a time) similar to the technique used in this video by Shelby Acosta. (Shelby catches four strands from each side while joining, whereas I only caught two strands from each side, but otherwise the technique is the same.) The join itself adds a nice bit of contrast to the variegated yarn, so after finishing off the join I twisted it around on the wreath form until the joined stitches were visible on the front side of the wreath.

I whip-stitched the tube ends together at the bottom of the wreath, tied a few knots to secure the ends, and that was it.

Now all that's left to do is to add a hanging loop, and also to decide whether I want to add any trim pieces to make my wreath even cuter. Some white pompoms or even some silk flowers or greenery might look nice. What do you think?