CPAP Hose II free recipe/pattern

Experimenting with another crochet CPAP hose cover design for 72-inch hose. My brother-in-law is new to using a CPAP and needs something to help make the experience more comfortable for him. This Red Heart Velvety yarn is super, super soft, but also machine washable/dryable, so it should work well.

Using 6mm hook, FSC 16 sts (about 6 inches long), then continue working in continuous rounds. I made the first round after foundation row in SC then switched to HDC to help the rest of the project grow faster. At my gauge two rows of HDC equaled about 1 inch in height. Working this way one skein yielded about 47 inches of tube, a little over half as long as I wanted, so I had to break into a second skein to reach the desired finished length.

I placed a marker to indicate when my tube had reached a length that was about half as long as the finished tube should be (for me this was after 2 rows SC plus 80 rows HDC). It’s important to measure the actual length of your work to determine where you’re at rather than to rely on row counts for length, just to make sure you end up with a finished tube that’s the right size. Once you’ve marked the halfway point, you can fold the tube at the marker as you work the second half to more easily figure the length of the second half. (At least for me this is easier than constantly using a tape measure to figure out where I’m at.)

Continue working until the tube you’re crocheting measures about 76 inches long. In my experience these hose covers work better if they’re a little longer than the hose itself. Switch to 5mm hook and finish with 4 rounds of FPDC/BPDC for a ribbing effect, then fasten off and weave in ends.

For better performance sew a couple of rows of silicone-striped grip elastic to the inside of the hose cover at the ribbed end (cut elastic to 3.5-inch lengths). This will be the end closest to the user. The grip elastic will cinch the cover against the hose, and the silicone grip will prevent the cover from slipping down the hose and away from the user. The whole point of using a hose cover is to keep the cold plastic away from the CPAP user. Well, that and a hose cover cuts down on air noise and prevents condensation buildup.

Placing the grip elastic at only one end also makes it easier to feed a fresh hose into the cover from the end without the elastic when it’s time to change the hose.

Granny Squared Into Highlighter Hell Throw free pattern

I found a couple more skeins of the unidentified colorway aka “Highlighter Hell” (what I call it) by Red Heart, so I decided to use it along with some plain white to make an infinite granny square throw for my daughter who loooves these (horrifically) bright colors. 😉

After trying to work this continuous granny square in full rounds of a single color, I discovered that there was not a good way to carry the next color up for the subsequent round without leaving a long loop on the reverse side where I changed colors (see below). I was afraid that the only way to “fix” this would be to add a lightweight flannel backing to cover the reverse side and hide the loops.

I pondered this problem for a while and concluded that the best way to avoid it would be to use a two-color spiral method, so I went searching for a pattern and found The Continuous 2 Color Granny Crochet Tutorial by Fiber Spider on YouTube. Ta-da!! This method is an absolutely brilliant way to work a two-color continuous granny stitch blanket without having to tie off after every single round (and have eleventy-bazillion ends to weave in when you’re done, plus all those ends would equal a lot of wasted inches of yarn), and it eliminates the big-loop-from-carrying-up-the-yarn problem I was having. Like I said: Brilliant!!

Here's a comparison of the obverse view of working the blanket in full rounds of each color (left) vs. the half-rounds used in the Fiber Spider method (right). As you can see, the different methods are undetectable to the eye, but Fiber Spider's method results in a blanket that is fully reversible and looks tidy on both sides:

I just kept working rounds on the throw until I ran out of the Highlighter Hell color. Then I used some highlighter orange yarn from my stash to work a border of one round SC followed by one round RSC or crab stitch. Finished size is about 44 inches square.

Works when they were still in progress ...

Shapes in crochet

Apparently I have a tendency to knit or crochet things shaped like the Millennium Falcon. Or Pac-man. Whatever. 😅

Pink Grapefruit Lemonade blanket contemplation

I have a bunch of skeins of vintage acrylic yarn (circa 1960s), and I’m trying to finally use them to make an afghan. And although I’ve tried several different stitch patterns, so far nothing is really jumping up and grabbing me to say, “This is the one!” I’ve tried drunken granny, C2C granny, and circle granny thus far. I’m afraid I may end up defaulting to my favorite afghan pattern -- virus -- which wouldn’t be terrible because the virus afghan is lovely, but I thought I wanted to make something different this time. Ugh!

As you can see in the photos, I tried starting out in all the stitch patterns mentioned above. The furthest I got with any of them was in the “drunken granny” stitch, which I had seen some people talking about online but I hadn’t previously heard of this stitch. The photos they shared looked interesting, so I went looking to see whether the pattern was available on Ravelry but was disappointed not to find it here. However, there are several good video tutorials for this stitch on YouTube. I used this one.

I usually prefer to have written instructions to refer to, however, and I also can never leave well enough alone, so I jotted down the starting instructions from the video and also embellished them to work if using FSC instead of a starting chain.

Drunken Granny easy crochet baby blanket pattern

Setup row: Chain in multiple of 5 to desired width of the finished blanket (or FSC in multiple of 5 plus 1).

For foundation chain setup, row 1: Ch 4. DC in 5th ch from hook 1st FSC. DC 3 more times (total of 4) in same st; ch 2; DC in same st. Skip 4 sts; 4 DC in next st; ch 2; DC in same st repeat until 3 sts remain at end of row. Skip 2 sts and DC in last st. Ch 3; turn.

For FSC setup, row 1: Ch 3. DC in 3rd FSC from hook. DC 3 more times (total of 4) in same st; ch 2; DC in same st. Skip 4 FSC;

Row 2: Working into ch 2 spaces from previous row, 4 DC in next ch 2 space; ch 2; DC in same space. Skip to next ch 2 space. 4 DC in ch 2 space; ch 2; DC in same space repeat to end of row. DC in top of ch 3 from previous row. Ch 3; turn.

Repeat row 2 until blanket reaches the desired length.

Work a SC border around all 4 edges to finish.

For different looks this blanket can be worked in a solid color, in stripes alternating colors every 3 rows (or more), in an ombre gradient yarn, etc.

To me part of the appeal of the drunken granny stitch is that it reminds me of falling ginkgo leaves even more than an alternate version of a granny cluster. But I still wasn’t inspired enough by it to keep going with it in a full-sized blanket.

So … virus it is, I guess. LOL. Virus is turning into my go-to blanket pattern. Le sigh!! 😏

And thus the Pink Grapefruit Lemonade afghan came to be.

Playing yarn chicken

When you play "yarn chicken," you win some, and you lose some. Oh well! 

OOOH, I found another skein in the stash bag where the first baby pink skein came from! I'm saved!! Bwah-ha-ha ...

Better to be lucky than good sometimes. 🙃