Handy little earbuds pocket - free pattern

Here's a super-quick to make little pocket to help keep your wired earbuds wrangled and hopefully less tangled.

I keep a set of wired earbuds near my chair in the living room so they are handy whenever I want to listen to a video on my laptop or phone while my husband is next to me watching TV. That way I can listen to my thing without competing with the sound coming from the TV.

But the problem with wired earbuds is: How do you keep them neatly coiled and out of the way when you aren't using them? I would wrap the wire around my hand into a neat roll, but after I set it down, the wire would inevitably come unrolled and turn into a tangled mess.

So eventually I thought if I crocheted a little pocket to tuck my rolled-up earbuds into, it would hold everything together until I was ready to use them again.

You could make this with just about any yarn or hook size, but I used a worsted weight cotton (Lily Sugar 'n Cream Ombres in the Faded Denim colorway) and a 6mm hook. If you use lighter or heavier yarn, you would need to alter the stitch count to make a pocket that's approximately 2.5 inches in diameter at its widest point.

Setup: I started with a magic circle and worked in a continuous spiral (no joining at the end of rounds).

Row 1: 6 SC in magic circle. Use a stitch marker to keep track of the beginning of the rounds and move up when you start each new round. (6 SC)

Row 2: 2 SC in each st around. (12 SC)

Row 3: 2 SC in next st, 1 SC in next st. Repeat around. (18 SC)

Row 4: 2 SC in next st, 1 SC in each of next 2 sts. Repeat around. (24 SC)

Rows 5-6: 1 SC in each st around. (24 SC)

Row 7: Dec SC over next 2 sts, 1 SC in each of next 2 sts. Repeat around. (18 SC)

Row 8: Dec SC over next 2 sts, 1 SC in next st. Repeat around. (12 SC)

Row 9: SC in each st around. (12 SC)

Finishing: Sl in next st. Use an invisible join technique and finish off. Weave in ends. Enjoy your handy little earbuds pocket. 

Veterans Day Parade Camo Beanie or Messy Bun Hat free pattern

I love this Red Heart Super Saver Woodsy colorway because it reminds me of the old forest/jungle Army BDUs my husband (a Vietnam War veteran) used to wear. These colors work up to make a nice hat to wear to keep your head warm (and is long enough to cover your ears) while watching your community’s Veterans Day parade or participating in other similar celebrations in chilly November to honor and remember the many military personnel who have died in wars.

I suggest pinning a red remembrance poppy to your hat. I've read that there is no right or wrong way to wear the poppy. Some people pin them to their left lapel to position the poppy close to their heart; others wear it on the right lapel to position the poppy close to what would be the 11th hour mark if your body were viewed as the face of a clock. (If your poppy has a leaf, the leaf should also be positioned at 11 o'clock.) A Google search will provide links to multiple articles you can read about the history and etiquette of the remembrance poppy. Here's a poppy article by the American Legion.

M and L sizes of the hat use just about one full skein of RHSS in Woodsy. For size XL part of a second skein likely will be required. Other worsted or aran weight varigated yarns with short color changes (about 4-6 inches long) should give a similar result.

It's very easy to make this simple, slouchy, relaxed-fit hat as a beanie or in a messy-bun/ponytail style. Size M measures about 10 inches across the bottom when held flat, which should stretch to fit an average teen or adult’s head (20-22 inches). Size L measures about 11 inches across the bottom, which should comfortably fit heads 22-24 inches. Size XL measures about 12 inches across the bottom, to fit heads 24-26 inches.

You can copy what I did by following the easy steps below, or you can use my instructions as a jumping-off point to make a custom hat to suit your own taste. The hats are made using the hdc in the third loop stitch, which gives a sideways knit look on the obverse side and a sideways garter stitch look on the reverse side.

Supplies: 1-2 skeins Red Heart Super Saver (4) yarn in Woodsy, 5.0 mm (H) crochet hook, one large ponytail elastic (optional for messy-bun/ponytail version)

Beanie hat instructions

Setup for a beanie in all sizes: In a magic ring, hdc 10. When you reach the end of the round do not join with a slip stitch; continue working the rest of the hat in continuous rounds. Use a stitch marker in the first stitch of the round and move marker up on each successive round. (10 hdc)

Round 2: Work 2 hdc3lp (hdc in the third loop) in each hdc from the previous round. (20 hdc3lp)

Round 3: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in the next hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in the next st. ** Repeat from * to ** to end of round. (30 hdc3lp)

Round 4: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 2 hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 2 sts. ** Repeat from * to ** to end of round. (40 hdc3lp)

Round 5: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 3 hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 3 sts. ** Repeat from * to ** to end of round. (50 hdc3lp)

Round 6: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 4 hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 4 sts. ** Repeat from * to ** to end of round. (60 hdc3lp)

Round 7: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 5 hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 5 sts. ** Repeat from * to ** to end of round. (70 hdc3lp)

Round 8: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 6 hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 6 sts. ** Repeat from * to ** to end of round. (80 hdc3lp)

Stop increasing at 80 sts for size M. Sizes L and XL will increase again on round 9.

Round 9: For size M, work 1 hdc3lp in each st around. (80 hdc3lp).

For size L, work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 19 hdc from the previous round.  * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 19 sts. ** Repeat from * to ** to end of round. (84 hdc3lp)

For size XL, work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 9 hdc from the previous round.  * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 9 sts. ** Repeat from * to ** to end of round. (88 hdc3lp)

Rounds 10-29 (31, 33): Work 1 hdc3lp in each st around. (80, 84, 88 hdc3lp)

Finishing: To taper down to a smooth edge, work 1 sc in the third loop of the next hdc from the previous round, then slip stitch into the third loop of each of the next two hdcs from the previous round. Finish off, weave in ends.

Messy-bun/ponytail hat instructions

These instructions pick up at what would be round 4 for the beanie style hat.

Setup: Place a slipknot on your hook and slip stitch around a large ponytail elastic to attach. Chain 1 and work 40 hdc tightly around the ponytail elastic. (Alternatively you could start with 40 FHDC.) When you reach the end of the round do not join with a slip stitch; continue working the rest of the hat in continuous rounds. Use a stitch marker in the first stitch of the round and move marker up on each successive round. (40 hdc)

Round 2: Work 1 hdc3lp (hdc in the third loop) in each hdc from the previous round. (40 hdc3lp)

Round 3: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 3 hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 3 sts. ** Repeat from * to ** to end of round. (50 hdc3lp)

Round 4: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 4 hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 4 sts. ** Repeat from * to ** to end of round. (60 hdc3lp)

Round 5: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 5 hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 5 sts. ** Repeat from * to ** to end of round. (70 hdc3lp)

Round 6: Work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 6 hdc from the previous round. * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 6 sts. ** Repeat from * to ** to end of round. (80 hdc3lp)

Stop increasing at 80 sts for size M. Sizes L and XL will increase again on round 7.

Round 7: For size M, work 1 hdc3lp in each st around. (80 hdc3lp).

For size L, work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 19 hdc from the previous round.  * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 19 sts. ** Repeat from * to ** to end of round. (84 hdc3lp)

For size XL, work 2 hdc3lp in the first hdc from the previous round; work 1 hdc3lp in each of the next 9 hdc from the previous round.  * Work 2 hdc3lp in the next st, 1 hdc3lp in each of the next 9 sts. ** Repeat from * to ** to end of round. (88 hdc3lp)

Rounds 8-26 (28, 30): Work 1 hdc3lp in each st around. (80, 84, 88 hdc3lp)

Finishing: To taper down to a smooth edge, work 1 sc in the third loop of the next hdc from the previous round, then slip stitch into the third loop of each of the next two hdcs from the previous round. Finish off, weave in ends.

I hope you enjoy making and wearing (or gifting) this hat!