Mini Simple Stardew Valley Chicken

I discovered that this pattern makes an adorable chick-sized mini chicken if you use a few scraps of standard 4-weight yarn, a 5 mm hook, and 8 mm safety eyes. This is the Simple Stardew Valley Chicken free pattern, which can be found on Ravelry.

They are so quick and easy to make that you can whip up a whole tiny flock in just an evening. I made all three of these in just a few hours. 

Each chick measures about 3.5 inches long by about 2.5 inches tall (not including the comb). The kawaii safety eyes came from this kit on Amazon. You can view more info about the yarns I used for these on my Ravelry project page.

The pattern was originally designed to be made with chenille blanket yarn, which produces a much larger softie (example photo from the pattern below).

 

Pen Pocket for my Doc

At my recent checkup, my doctor, who is an active duty officer in the Air Force, was complaining that she didn't have anywhere to carry her pen in her Class B uniform blouse. (The Air Force women's Class B uniform blouse doesn't have any pockets.)

My husband mentioned to her that when he's wearing a shirt without a pocket (which almost never happens anymore), he would clip his pen so that it was sticking out between the buttons in the front button placket. My doc thanked him for the suggestion but pointed out that wearing a pen that way would not only technically make her be "out of uniform," but that it also wouldn't sit as well on a woman (breasts, obvs). I included a random photo from the internet, below, to show (more or less) the way my husband was suggesting she could wear her pen, except that this picture doesn't show the pen's clip holding onto the front of the button placket the way my husband was describing.

My doc was wearing an ID lanyard, however, so the idea that popped into my head was to sew a pen pocket for her that could be attached to her lanyard and was made from a similar-color fabric as the light, almost baby blue of her uniform blouse (in the hope that the color would make it less conspicuous). The only way I would ever be able to exactly match the fabric color is if I were to buy a woman's Class B uniform blouse at the AAFES clothing sales and cut it up to use the fabric to sew the pen pocket. So I'm hoping that the fabric I used will be a close-enough match.

I asked her if adding a pen pocket like that to her lanyard would make her be considered to be "out of uniform," and she didn't think that it would, so we agreed that a pen pocket on her lanyard could maybe work for her.

I told her I would sew one for her and bring it to my next appointment (whenever that is! LOL! I don't actually see her very often).

After searching around online, I settled on this tutorial by Ashley Hough for how to sew an elastic bookmark, because the pen/pencil pouch portion of the tutorial was a close match to what I had in mind to give to my doctor. The only real difference with mine is that instead of sewing the pouch to the long loop of elastic, I added a button hole to the top flap for the lanyard's plastic loop to fit through. (This was the first time I'd ever used the button hole function on my new sewing machine, so that was exciting, too. I think it turned out pretty well and was a lot easier than the way I used to have to sew button holes.)

The finished dimensions are about 6.5 inches long by about 1.75 inches wide. It has two pockets, so it can hold two pens or one pen and one pencil. It was a quick and easy project and only required just a small amount of fabric. I also added featherweight fusible interfacing to the back of both pieces of fabric to help them hold their shape. 

I hope my doctor finds this little accessory helpful while she's on the job!

Tooth Fairy Pillow pocket lovey

This tooth fairy pillow is going to be a gift for my wonderful dental hygienist, Carra.

In recent years, I've developed awful sensitivity in my teeth from enamel damage incurred from grinding my teeth and/or clenching my jaw during sleep. I started wearing a mouth guard at night, but not until after the damage was already done.

Ever since my teeth were damaged, having dental cleanings done has been terribly painful, to the point where I even considered not going to the dentist at all anymore (yeah, of course, I know that skipping dental visits wouldn't have made my situation any better, obviously, but ugh). I even felt that I had to change dental practices because my previous dentist didn't seem to be sufficiently sympathetic to my pain and wasn't really working with me to follow a plan to manage it.

My new hygienist, Carra (and, really, the entire team at Dr. Shelton's), has been nothing short of AMAZING. Carra has been very sympathetic and gentle with me at every visit and always gives me and my teeth the most wonderful care.

I always try to profusely thank Carra each time I see her, to let her know how much I appreciate her wonderful "bedside manner," as it were, but in addition to saying thank you, I wanted to give her a small, tangible token to express my gratitude, and thus I went searching for a crochet tooth pattern that was both super adorable and also sort of representative of who she is in her career. To me, Carra is my personal tooth fairy angel! 👼

This free Tooth Fairy Pillow pattern by Heather Corinne Smith is just right in every way. (She also has a video tutorial you can follow.) The design makes a tooth softie/lovey of a nice size (mine is about 6 inches tall, not including the hanging loop, by 6 inches wide), and the kawaii embroidered facial features are just so cute. The pocket on the back (about 3.75 inches wide by 2.5 inches tall) is the perfect size for holding a Dutch Bros gift card and sticker to add an extra touch of sweetness to the gift. I finished mine by adding a bow made of a small scrap of hot pink ribbon (it was only about 8 inches long to start with, so it was barely long enough, but it worked!!) that I had in my stash and followed this quick tutorial on YouTube to tie it, then I carefully sewed it to the tooth using a needle and thread.

Back with pocket

This turned out so cute, and I think Carra is going to love it. So if you love your dental hygienist as much as I love mine, maybe you should make one of these for your hygienist, too!

Tendril Shawl

The pattern for this Tendril Shawl is available for free on the designer Carmen Heffernan's blog. She also provides a video tutorial that walks you through the setup rows and the first couple of pattern repeats, which is very helpful for getting this project started.

I made mine at a heavier gauge than the original pattern calls for, but it worked out well and produced a lovely shawl/wrap/scarf. My yarn is Hobby Lobby I Love This Cotton in the Emerald Pine colorway, which is labeled as a 4 weight, and I'm using a 5.5 mm hook. I had a few skeins of this colorway left over from my Dressy Swingy Shawlivest project, and I thought they would look good being worked into the Tendril Shawl design. This yarn looks and feels more like a 3 weight despite the fact that it's labeled a 4 weight, and the cotton is so soft and smooth that it's a pleasure to work with.

Finished with gothpixy's edging

I love the sawtooth edge and the beautiful lacy-ness of this shawl. The project grows quickly, which is satisfying, and the four-row repeat becomes fairly intuitive after you've worked it a few times.

Finished size

The only downside to using this particular yarn is that the skeins are pretty short at only 153 yards each, so I was worried I might not have enough yardage on hand to make a full size shawl. The first skein ran out at the beginning of row 36. 

End of first skein

The second skein ran out after making it most of the way across row 52.

End of second skein

My third skein ran out almost at the end of row 64. Thankfully, I had another skein available to finish that row and continue, because the top edge of my shawl was only about 64 inches long at that point. I used the fourth skein to work another two "points" and then do the edging row.

End of third skein

I started working the picot edging row as written in the pattern, but I felt that it was coming out too tight, so I searched through the Tendril Shawl project gallery page until I found gothpixy's project.

Gothpixy suggested an alternate way to work the picot edging that I ended up using for my project. I like their edging better for two reasons: One, it provides a lovely bumpy, wavy edging that finishes the edge really well with an easier method than working traditional picots. And two, it utilizes an extra chain stitch between each bump, so the edging doesn't tighten the edge in the same way that the original pattern's edging row was doing for me. You should check out gothpixy's project to see if maybe you might like their edging better, too!

Getting started

The designer says the finished fingering-weight samples she made measure about 70 inches (178 cm) on the long top edge after 64 rows (65 rows with the final edging applied), which is 16 "points" on the bottom edge, and 32 inches (82 cm) tall/deep on the border edge after blocking. 

I crocheted mine to 18 points, or 72 rows, plus the edging row. My shawl's total length is about 72 inches before blocking.

Emotional Support Chicken

I just couldn't resist the allure of the Emotional Support Chicken any longer. Meet Scrappy Henrietta! 😍

This pattern arrived on the knitting scene sometime in 2023 or 2024 (I believe), and the internet practically EXPLODED with excitement.

I added the pattern to my Ravelry favorites for safe-keeping but decided to wait before making one. I noticed, however, as the months went by the way the emotional support chicken consistently remained on the first page of Ravelry's "hot right now" designs, suggesting that the internet's adoration for the ESCs had yet to abate. It was on FIRE.

Eventually, I just couldn't resist the pull of the ESC any more.  

I think the thing that put me over the edge was when I discovered that The Knitting Tree LA had made a companion video for the pattern. Checking out the video was my undoing. 😂

Tail part 1

I grabbed a long old scrap of Hobby Lobby's I Love This Yarn in the Jazzy Stripe colorway (left over from an Infinite Granny Square afghan project) and cast on to follow along with the video, which starts at the tail.

Tail part 2

For part 2 of the tail and the main part of the body, I used a couple of long scraps of Red Heart With Love in the Pewter Gray colorway that were left over from when I made my Autumn Mists vest with no pattern.

Tail and main body

I don't know which yarn I used for the neck and head, but it was one long scrap of an ombre-ish yarn with purple, dark pink, and raspberry colors that is probably something by Red Heart, but I didn't have a label for it anymore.

Neck and head added

I used up the remainder of the raspberry ombre scrap for the top end of the undersection piece, and more of the gray yarn to finish the undersection.

Henrietta got a bit wonky as I was sewing her up, where the two ends of her neck stripes don't line up at the front, but hey. She is still adorable, and I wuv her!! She has 15 mm blue safety eyes from a pack that I bought off Etsy years ago from a seller named 6060, who is no longer active on the site. Whenever I'm installing safety eyes, I always use this tool to help set the backs, because it makes it a lot easier for my arthritic hands to handle the task of snapping them on securely.

You might be able to knit a whole ESC by only watching the video, but I think the video really makes a better accompaniment if you also own the written pattern, so before I reached the end of the first tail section, I bought the pattern: And the emotional support chicken claimed yet another willing (happy) victim. 😂

I followed this up by making a friend for Scrappy Henrietta, another Emotional Support Chicken, Scrappy Patty, in colors to match our guest bedroom.

Scrappy Patty and Scrappy Henrietta

 

Scrappy Patty sitting on the bed in our guest bedroom

Scrappy Patty side view