Round Basket for Square Coasters free recipe

I'm still in the middle of a severe flare of lateral epicondylitis that started around Dec. 18 (I guess I did too much crocheting trying to finish off a few Christmas gifts), so my ability to do any crocheting or hand knitting has been very limited until my arms settle down, but I wanted to see if I could get this useful basket crocheted within a reasonable amount of time, so I gave this small project a try. It only took a couple of hours to complete.

This basket is to hold and protect our set of four square Thirstystone coasters, which are about 3.75 inches square, when they aren't in use. You can use these instructions as a jumping-off point to make a basket in just about any size you wish, so this post is more of a "recipe" than an actual pattern.

Yarn is held double, using two different colors for a bit of a tweed look. I used Red Heart Super Saver in Grey Heather and Red Heart Super Saver Ombre in True Blue (only small amounts of each yarn are needed, depending on how big you want your finished basket to be) and worked with a 6.5mm hook.

I like how working the two strands of yarn in this tight gauge results in a basket that's firm enough to hold its shape. The feel reminds me of felted work, although it is not felted.

For base of basket: Ch 5; join with sl to 1st ch to form a ring. Working in ring, SC then HDC 9 times (10 sts). This basket is worked in continuous rounds, so do not join at end of rounds. Use a stitch marker to keep track of beginning of rounds and move marker up as you go. 

To start 2nd round, work 2 HDC in 1st st and 2 HDC in each other st around (20 HDC). 

For 3rd round, work 2 HDC in 1st st, 1 HDC in next st, and repeat this way around (30 HDC). 

For 4th round, work 2 HDC in 1st st, 1 HDC in each of next 2 sts, and repeat this way around (40 HDC). 

For 5th round, work 2 HDC in 1st st, 1 HDC in each of next 3 sts, and repeat this way until you are halfway around the circle (for a total of 45 HDC). Sl into the back loop only of the next st; this will become the new beginning point of the rounds.

For sides of basket: For the first round of the basket sides work all sts in back loops only of sts in previous round. As before, work in continuous rounds without joining at the end of rounds. Use a stitch marker to keep track of beginning of rounds and move marker up as you work. Work 1 SC in next st, then 1 HDC in each remaining st around (45 sts). 

Continue on working subsequent continuous rounds of 45 HDC until sides of basket are as tall as you want them. My basket is 8 rounds tall (counting from after the base rounds).

To finish off, SC in next st; sl in each of next 2 sts. Break yarn; work invisible join; and weave in ends. Alternatively you could also work a round of reverse SC (aka crab stitch) to finish the top edge of your basket with a rope-like edging. (My arm was hurting, so I just finished my basket off without adding an edging to the top as soon as it was big enough to fit our coasters.)

My First Addi Kingsize Hat

Happy New Year! This is the very first item I knitted on my new Addi Express King Size machine. I used an old hank of what I'm guessing is some Red Heart yarn in a nice red color that I had in my stash (no label). 

Jojo's video says if you want to make a double-layered adult size hat like this you should knit between 140-150 rows, but my yarn hank ran out at 137 rows. That's probably close enough to make a usable hat since this feels like a Red Heart yarn that's on the heavier side of size 4.

Finished hat is about 15 inches long, with the cuff unrolled. Being able to knit and finish an entire hat in less than an hour is miraculous. I will be able to make so many hats to donate to the needy this way that I wouldn't be able to do otherwise. Love these knitting machines.

Total weight: 114 grams

Circle Hot Pad pattern - totally giftable

I consider myself a tight crocheter, but I did have to go down two hook sizes to match the designer's gauge on this Circle Hot Pad by Esther Thompson. As she said, gauge isn't very important for this potholder/trivet, but you do want to have a nice firm fabric to protect surfaces or your hands from the heat. This was very quick to make and is so cute and totally giftable. The Hobby Lobby Crafter's Secret Cotton in the Desert Gold colorway looks modern and chic. There is a free version of this pattern on the designer's website.

I added a hanging loop by chaining 10 at the end of the last round, slip stitching the chain to the trivet next to where I started chaining, then turning and working 20 SC's back over the chain. A 1-inch wooden or metal ring sewn to the trivet would also look nice as a hanging loop. 

There was also just enough of the main color (Desert Gold) left to make a coordinating 4-inch-diameter coaster in 6 rounds. I made it double-layered like the trivet, but for the coaster I slip stitched it together with the ivory yarn for a bit of contrast on the colorful side. 

The multicolored balls of this Crafter's Secret cotton are 57 grams, whereas the solid color balls are 71 grams. So, using the solid color as the contrast color for this project, you have enough of the solid color to make two trivets (if you don't use any to make a coaster, the way I did).

I gifted the colorful trivet set to my niece Renee, and I made another set to give to my sister Juanita in the Hobby Lobby Crafter's Secret Cotton in the more neutral-looking colorway called The City.

Winter in the South - new free pattern

Hello, everyone! I just published a new free pattern at Ravelry for my Winter in the South hat, so click on this link to head on over to Ravelry and download your free copy. I sincerely hope you enjoy this comfy, wearable design, and if you're inclined to give it a heart or make a project page where we can all see the lovely hat you made, that would just make my day. 😊

 Winter in the South is a top-down, seamless, slouchy ponytail/messy bun beanie made in an airy double-crochet mesh that’s perfect for winter conditions that are chilly but less-than frigid. I used Hobby Lobby I Love This Yarn for the sample in the photos, but most any worsted/aran weight size 4 yarn should be suitable. My sample hat used slightly less than half of the skein of ILTY.

This is a copyrighted, free crochet pattern offered by Yarncraft by Susan in adult/one size only. Written with standard U.S. crochet terms.

Quick and easy CPAP hose cozy

Knitting machines with 22 needles are the perfect size to knit cozies to cover a CPAP air hose. 

I didn't precisely count the rows on this project on the Sentro 22, but it's pretty close to 390 rows of knitting (about 72 inches) with a few rounds of SC (5.5mm hook) on each end for stability.

Red Heart Super Saver Neon Stripes colorway

I'll probably also add two straps with ends secured by small buttons at one end of the cozy so the straps can hold the wearer's mask end of the hose up close to the mask to keep the cozy from slipping down during use.

It only took about an hour to machine knit this piece. Attempting to knit the same thing by hand would have taken me weeks (and probably at least 12 hours) of work. So having a knitting machine available is a huge help to me for projects like this. I do love to hand knit (and there are lovely stitches you can hand knit that a machine like this will never be able to replicate), but I have chronic pain issues that severely limit how much hand knitting I can do.

**UPDATE**

I knitted another one of these using the Red Heart Super Saver Jumbo Stripes in the Bright Stripe colorway on my Addi 22, which has a row counter on it (hallelujah!!). On the Addi, I was getting about 5 rows per inch. At that gauge, it takes 360 rows to make a 72-inch-long tube, so that's how many rows I made the Bright Stripe cozy, plus leaving extra yarn at each end to crochet the edging and straps. (I forgot that I usually prefer to make the tubes more like 74 inches long to better fit the CPAP air hose ... so in that case the knitted tube should have been 370 rows. Mental note for next time!!)

Making a tube this long works best if you can mount your knitting machine on a table where the work can hang free down the middle, such as my Workmate table shown in the photos. Even at that height, I still had to tuck in the end of the tube for about the last 100 rows to keep it from dragging on the floor.

The mask-end straps are each 16 chains long, then slip stitch back across the chain to reinforce.

The colors are pretty similar between the Neon Stripes and the Bright Stripe colorways, but I think I like the Bright Stripe better because it doesn't have a black band in between every other color stripe. I guess whichever one would be better just depends on what you want your project to look like. They are both fun and funky colorways.